| 项 目 (Item) |
数 据 (Data) |
| 认证( APPROVAL) |
/ |
| 测试标准( Test standard) |
IEC61984/UL1059 |
| 产品间距( Pitch) [mm] |
7.50 |
| 极数( Poles) |
02~12P |
| IEC60947-7-4测试数据( IEC60947-7-4 Test data) |
/ |
| 额定电压( Rated voltage) [V] |
400 |
| 额定电流( Rated current) [A] |
20 |
| 额定连接容量( Rated connection capacity)(solid/stranded) [mm2] |
0.2~2.5 |
| 过压类别/污染等级/绝缘材料组别 ( Surge voltage category/pollution degree/material group) |
III/3/I |
| 额定脉冲电压( Rate impulse voltage) [KV] |
4.0 |
| 额定扭矩( Rated torque) [N.m] |
/ |
| UL1059测试数据( UL1059Test data) |
UL 1059 |
| 应用组别( Use group) |
B |
C |
D |
| 额定电压( Rated voltage) [V] |
300 |
/ |
/ |
| 额定电流( Rated current) [A] |
15 |
/ |
/ |
| 额定连接容量( Rated connection capacity) (solid/stranded)[AWG] |
22-14 |
| 额定扭矩( Rated torque) [Lb. in] |
/ |
| 通用数据( General data) |
/ |
| 阻燃等级( Inflammability class) UL94 |
V0 |
| 环境温度( Ambient temperature) [℃] |
-40~+105 |
| 相对湿度( Relative humidity) |
5%-95% |
| 抽样检验标准( Inspection standard) |
MIL-STD-105E II |
| 允收水准( AQL) |
0.65 |
| 保质期( Warranty) |
12 months |
| 材质和电镀( Material and plating) |
/ |
| 绝缘材质( Housing) |
PA66 |
| 弹片( Spring) |
Stainless stee 不锈钢 |
| 夹子( Clamp) |
Copper alloy，Sn Plated 铜合金，镀锡 |
| 接线方法( Wire connecting) |
| 推荐剥线长度8-9mm; Recommended stripping length 8-9mm; |
| 1.）单股硬导线，剥好对应长度的导线后，下压按钮同时将单线接入； For solid wire, stripping wire to the appointed length, then tightening with rated torque. |
| 2.）多股柔性导线，剥好对应长度的导线后，可以直接连接或者配套使用对应标准规格的冷压端
头，下压按钮同时将线接入； For stranded wire: stripping wire to the appointed length, mating with corresponding type of ferrule, then tightening with rated torque. |
