DG380A-3.81-DEGSON高正端子代理商
DEGSON高正代理商:
上海闻奇电子股份有限公司
TEL021-6360 7996 021-5308 2868
Email:zhongshan@newbil.com
客服1：QQ:570461443
客服2：QQ:33618828
客服3：QQ:2418645370
客服4：QQ:27747100
DEGSON高正授权代理商
TDK-LAMBDA授权代理商
BINGZI北京创四方授权代理商
| 项 目 (Item) | 数 据 (Data) | ||
| 认证(APPROVAL) | / | ||
| 测试标准(Test standard) | IEC60947-7-4:2012/UL1059 | ||
| 产品间距(Pitch) [mm] | 3.81 | ||
| 极数(Poles) | 04-24P | ||
| IEC60947-7-4测试数据（ IEC60947-7-4 Test data) | / | ||
| 过压类别(Overvlltage Category) | III | ||
| 额定脉冲电压（Rate lmpulse Valtage） [KV] | 2.5 | ||
| 额定电压(Rated voltage) [V] | 160 | ||
| 额定电流(Rated current) [A] | 12 | ||
| 额定连接容量(Rated connection capacity)(solid/stranded) [mm2] | 0.2-1.5 | ||
| 额定扭矩(Rated torque) [N.m] | 0.2 | ||
| UL1059测试数据（UL1059Test data) | UL1059 | ||
| 过压组别(Use group) | B | C | D |
| 额定电压(Rated voltage) [V] | 300 | / | / |
| 额定电流(Rated current) [A] | 12 | / | / |
| 额定连接容量(Rated connection capacity) (solid/stranded) [AWG] | 30-14 | ||
| 额定扭矩（Rated torque） [Lb. in] | 1.77 | ||
| 通用数据(General data) | / | ||
| 螺丝(Screw) | M2 | ||
| 阻燃等级(Inflammability class)UL94 | V0 | ||
| 环境温度(Ambient temperature) [℃] | -40~+105 | ||
| 相对湿度(Relative humidity) | 5%-95% | ||
| 抽样检验标准(Inspection standard） | MIL-STD-105E II | ||
| 允收水准(AQL) | 0.65 | ||
| 保质期(Warranty) | 12 months | ||
| 材质和电镀(Material and plating） | / | ||
| 绝缘材质(Housing) | PA66 | ||
| 螺丝(Screw) | Steel，Zn plated钢，镀锌 | ||
| 触点材料(Contact) | Copper alloy，Sn plated铜合金，镀锡 | ||
| 方盒(Cage) | Copper alloy，Ni plated铜合金，镀镍 | ||
| 接线方法 (Wire connecting) | |||
| 推荐剥线长度5-6mm; Recommended stripping length 5-6mm; | |||
| 1.）单股硬导线，剥好对应长度的导线后，用额定的扭力拧紧；
For solid wire, stripping wire to the appointed length, then tightening with rated torque. |
|||
| 2.）多股柔性导线，剥好对应长度的导线后，可以直接连接或者配套使用对应标准规格的冷压端头，用额定的扭力拧紧；
For stranded wire: stripping wire to the appointed length, mating with corresponding type of ferrule, then tightening with rated torque. |
|||
| 注意事项：扭力要平稳，不能使用爆发力；( Tightening process should be steady, can’t use explosive force.) | |||
